Device Search

Detail View

Manufacturer: Altera

Package: DIP 28

Part Number: EPS448' or EPS448

Device Size:

Your device is not currently supported on LumenX.

Please try one of the following:

  • Check your search name or reduce the number of characters in the device name
  • Submit to request support for your device on LumenX here

Manufacturer: Altera

Package: DIP 28

Part Number: EPS448' or EPS448

Your device is not currently supported on FlashCORE.

Please try one of the following:

  • Check your search name or reduce the number of characters in the device name
  • Check to see if your device is supported on the LumenX programming engine LumenX
  • Submit to request support for your device on LumenX here

Manufacturer: Altera

Package: DIP 28

Part Number: EPS448' or EPS448

Programmers

Algorithm Versions

Product Name: UNISITE
Support Status: RELEASED
Minimum TaskLink Version: 5.00
Firmware Version: Released V 2.6
Standard Adapter
USSITE48
USSITE48HS

Notes:

  1. This device contains an Electronic ID. If an ID error occurs, the wrong device is selected or the version of this device is not supported. A software update may be required. Contact Your Customer Support Representative for more information. Any shorts test is not supported on the UniSite programmer.
  2. Device has phantom fuses in the JEDEC fuse map (ignored during Program and Verify operations). Fuses will load as ones. Device must be erased before re-programming to avoid error.
Product Name: AUTOSITE
Support Status: RELEASED
Minimum TaskLink Version: 5.00
Firmware Version: Released V 1.0
Standard Adapter
AUTOSITEDIP
PM300-DIP

Notes:

  1. This device contains an Electronic ID. If an ID error occurs, the wrong device is selected or the version of this device is not supported. A software update may be required. Contact Your Customer Support Representative for more information. Any shorts test is not supported on the UniSite programmer.
  2. Device has phantom fuses in the JEDEC fuse map (ignored during Program and Verify operations). Fuses will load as ones. Device must be erased before re-programming to avoid error.
Product Name: 3900
Support Status: RELEASED
Minimum TaskLink Version: 5.00
Firmware Version: Released V 1.0
Standard Adapter
3980/3900DIP

Notes:

  1. This device contains an Electronic ID. If an ID error occurs, the wrong device is selected or the version of this device is not supported. A software update may be required. Contact Your Customer Support Representative for more information. Any shorts test is not supported on the UniSite programmer.
  2. Device has phantom fuses in the JEDEC fuse map (ignored during Program and Verify operations). Fuses will load as ones. Device must be erased before re-programming to avoid error.
Product Name: 2900
Support Status: RELEASED
Minimum TaskLink Version: 5.00
Firmware Version: Released V 1.3
Standard Adapter
2900DIP48

Notes:

  1. This device contains an Electronic ID. If an ID error occurs, the wrong device is selected or the version of this device is not supported. A software update may be required. Contact Your Customer Support Representative for more information. Any shorts test is not supported on the UniSite programmer.
  2. Device has phantom fuses in the JEDEC fuse map (ignored during Program and Verify operations). Fuses will load as ones. Device must be erased before re-programming to avoid error.
Product Name: OPTIMA
Support Status: RELEASED
Minimum TaskLink Version: 5.00
Firmware Version: Released V 12/90
Standard Adapter
SP-S210 TOP48DIP

Data I/O Corporation
6645 185th Avenue NE, Suite 100
Redmond, WA 98052 USA

Telephone: +1 425-881-6444
Toll Free in USA: 800-426-1045
FAX: +1 425-867-6972