 |
|
|
Checksum
Issues
Do you have a question relating to checksum
calculation methods, or differences between
programming systems checksums? Check here.
|
|
Algorithm
Updates
Do you have questions about the proper method
of installing Data I/O programmers algorithm
updates? Check here. |
|
Base
V7 and new Asics
When using Sprint programmers, you will occasionally
encounter a message referring to Base V7 or
new Asics. Check here for more information. |
|
Problems
with Installation
If you need further information regarding
the installation of Data I/O products or troubleshooting
information referring to your install, check
here. |
|
Incorrect
module or base installed
Information about incorrect module/base errors
can be found here. |
|
What
does MOD XX/XX mean?
MOD's allow Data I/O Sprint programmers to
support a wider array of parts. More information
here. |
|
Questions
On Sector Protection/Security
Information on sector protection issues and
security fuses using Data I/O programmers
can be found here. |
|
Invalid
device ID
More information on Electronic ID errors can
be found here. |
|
Two
8-bit devices for a 16-bit application
Procedure for the programming of 2 8-bit devices
for a 16 or 32-bit data bus, sometimes referred
to as a Odd/Even split. |
|
Hardware
failed self test on power up
In the event that you encounter a hardware
failure while using your Data I/O programmer,
look here for assistance. |
Your Quote Request 
Submit Request 
My
Account 
